Author Topic: AE starlite dial lamp assembly  (Read 283 times)

Offline rbouch

  • *
  • Posts: 158
AE starlite dial lamp assembly
« on: January 26, 2019, 02:50:18 PM »
Hi

Does anyone have drawings of how a Starlite 54F dial lamp assembly goes together?

I have one and it seems to have two reddish plastic wafers and then a metal plate the wires from the 110v plug hookup to.

How are these to be assembled?  Plastic wafer, plate, plastic wafer, or some other way?

If anyone out there knows could you give me some advice?

Offline stub

  • **
  • Posts: 1608
  • AE Type 14 A
Re: AE starlite dial lamp assembly
« Reply #1 on: January 26, 2019, 07:22:01 PM »
 rbouch ,
             AE used several different insulators for these. You have the red ones . Use only one insulator . Here are 3 more different insulators in 1st pic. Start with the dial plate, then electro-luminescent plate, then insulator and put it all back together . Hope this helps .  stub
« Last Edit: January 26, 2019, 07:30:45 PM by stub »
Kenneth Stubblefield        
  CRPF
   TCI

Offline rbouch

  • *
  • Posts: 158
Re: AE starlite dial lamp assembly
« Reply #2 on: January 26, 2019, 08:44:47 PM »
Fantastic
Thanks,

Offline dsk

  • **
  • Posts: 4004
Re: AE starlite dial lamp assembly
« Reply #3 on: January 27, 2019, 01:57:05 PM »
Do not forget the plug with (or on early models in telephone) built in resistors to limit the current.

dsk