Author Topic: Spent this evening interfacing my 1A2 Shoebox KSU with my Avaya Definity G3  (Read 276 times)

Offline phr34k5h0w

  • *
  • Posts: 91
I had some free time tonight,  So i took some time and interfaced my shoebox KSU with my Avaya Definity. 
I got everything working except ring,  Even when a call comes in,  interrupter kicks on lights flash,  hold works.  So I made some progress

I even have it grounded since the 400D cards require that. 

Heres a pic of the install so far. 

Offline Babybearjs

  • **
  • Posts: 2619
I have the 551C unit, the back up to my 6A system if it ever totally dies...

Offline Key2871

  • **
  • Posts: 1581
If your 551 isn't ringing on incoming I question is the CA set up for ring, or do you have the card set up wrong..
I've never used a D card because I've had trouble with those before, so I went with a G or an H card.

Offline payphone2830

  • *
  • Posts: 5

Yep it could be CA ringing not setup or it could be the cards. Do you know if you have WECO issue 15 or latter? If its issue 14 or below, the cards will not work.