Author Topic: Model 1910 'Marty'  (Read 377 times)

Offline FABphones

  • **
  • Posts: 1919
Model 1910 'Marty'
« on: December 29, 2019, 02:50:37 PM »
Wiring schematics - Model 1910 ‘Marty’
« Last Edit: December 29, 2019, 02:58:39 PM by FABphones »
A collector of  'Monochrome Phones with Sepia Tones'
...and a Duck!
----------------
Vintage Phones - 10% man made, 90% Tribble
———————
‘You never realise how anti-social you are until there’s a pandemic and your life doesn’t really change that much’

Offline dsk

  • **
  • Posts: 4192
Re: Model 1910 'Marty'
« Reply #1 on: December 30, 2019, 11:31:24 AM »
Interesting solutions, if I understand this right it is possible to use on CB and LB power supply as this:
dsk

Offline countryman

  • **
  • Posts: 556
Re: Model 1910 'Marty'
« Reply #2 on: December 30, 2019, 11:44:27 AM »
Correct, it could be wired for LB or manual CB use. Then a capacitor would go into the battery box.
The upper diagram in FABphones post is an earlier version of the Marty, the photographed sticker is a later model already providing an anti sidetone coil.

IIRC also early german manual phones could be wired for LB or CB operation. Check www.erel.de : http://www.erel.de/INH/10/1010050/1010050s.gif
The gothic print is hard to read.