Author Topic: Stromberg Carlson Candlestick  (Read 106 times)

Offline jjflory

  • *
  • Posts: 109
Stromberg Carlson Candlestick
« on: January 11, 2020, 06:22:59 PM »
So, I got my SC Candlestick all disassembled and all parts have been media blasted.  Here in lies the questions.

1. Does the small brass ring (was originally Nickel) that sits between the bottom of the stick and the base of the stick does it come off?
2. If it does how do you git it removed?
3. If not can you re Nickel plate the brass ring and still powder coat the stick?
4. If #3 is not possible, would Nickel plate the whole phone?

Any thought on this would be appreciated.


Offline rdelius

  • **
  • Posts: 2394
Re: Stromberg Carlson Candlestick
« Reply #1 on: January 11, 2020, 06:32:38 PM »
That bottom ring just screws off. You can dress up a SC or Kellogg stick with a brass sleeve over the steel shaft. A  brass lamp fluted shaft will work also