Author Topic: All systems has + & - sides should I chose old or new system for my phones?  (Read 287 times)

Offline dsk

  • **
  • Posts: 4193
I have this one: http://www.classicrotaryphones.com/forum/index.php?topic=10104.msg107418#msg107418
And I have IP telephony.

Please do not just answer the old one because it is not that simple.
I have not too good trunk, reasonable for calling out, but just a single ringer on incomming calls, and the I have to dial the trunk to answer. 
I  is not possible to transfer a call.The power supply to the phones i2 only 24V on a single un-balanced supply so if one phone draw a lot of current the other will not get enough.

On the other hand, the IP system will fail on a power out. It will sometimes fail and act as one way sound (never figured out why, but that happens on "professional" systems too.)
The big pre's is incoming calls may ring lots of phones, I may transfer calls. I may configure routing and short numbers.


I will absolutely say that both 3CX works well and is free, and Callcentric has good systems, almost free, the combination is really nice. But I may still use much of that on my trunk line. (not transfere)

dsk

Offline dsk

  • **
  • Posts: 4193
I'll more and more go for the old step by step exchange. If I use Norwegian, or north American phones it will work pretty well, but German phones from before wwii will demand much more power they were designed for their systems with higher voltage, and as much as 60 mA line current.  May be I may do what we always say we should not. I may put a battery in series with the phone.  Another solution is to solder in a capacitor in the anti sidetone part of the circuit. 

dsk

Offline dsk

  • **
  • Posts: 4193
I'll give it a try, its always possible to change to something else.

Should not be to afraid to try :-)

dsk