Author Topic: I Need a Leich 601L Diagram  (Read 2812 times)

Offline LarryInMichigan

  • Hero Member
  • *****
  • Posts: 4824
I Need a Leich 601L Diagram
« on: October 12, 2010, 05:03:08 PM »
My Leich 601L arrived today, this time without any damage, but it does not work.  There is no line cord, and the wiring to the dial is obviously not original.  I tried connecting a line cord to the most obvious terminals, but without success.  I suspect that other wires are going to the wrong places, but I cannot find a wiring diagram.  The telephonecollectors.info website does not have a drawing for this model.  Can anyone provide a drawing?  

Thank You


Larry

« Last Edit: October 13, 2010, 11:42:53 AM by LarryInMichigan »

Offline Adam

  • Hero Member
  • *****
  • Posts: 912
    • Manufacture Discontinued
Re: I Need a Leich 600L Diagram
« Reply #1 on: October 13, 2010, 12:16:42 AM »
Try reconnecting that white wire that looks like it's supposed to go to the dial on the top screw in the picture...
« Last Edit: October 13, 2010, 12:25:03 AM by masstel »
Adam Forrest
Los Angeles Telephone - A proud part of the global C*Net System
C*Net 1-383-4820

Offline Jim S.

  • Hero Member
  • *****
  • Posts: 3324
Re: I Need a Leich 600L Diagram
« Reply #2 on: October 13, 2010, 02:09:52 AM »
I always thought those were Magneto only sets.

It is the older convertable, isn't it?

I would like to see a front view when it is back together.
Jim

You live, You learn,
You die, you forget it all.

Offline LarryInMichigan

  • Hero Member
  • *****
  • Posts: 4824
Re: I Need a Leich 600L Diagram
« Reply #3 on: October 13, 2010, 06:32:49 AM »
I am afraid that the wiring issue goes beyond the dial wire. 

This is the phone from my earlier post: http://www.classicrotaryphones.com/forum/index.php?topic=3518.0.  These do normally appear in the magneto variety.  This model is the predecessor of the Liech 700.

Larry

Offline LarryInMichigan

  • Hero Member
  • *****
  • Posts: 4824
Re: I Need a Leich 601L Diagram
« Reply #4 on: October 13, 2010, 11:45:10 AM »
I think that I have it sorted out now, after a bit of help from Roger Conklin on the TCI group.  He suggested looking at the diagram for the CB conversion of the Leich 901, which I had overlooked.  The 601 wiring is somewhat different than the 901, but I was able to adapt it.

Larry

Offline Kenny C

  • Hero Member
  • *****
  • Posts: 1850
  • Bell Sytem
Re: I Need a Leich 601L Diagram
« Reply #5 on: October 13, 2010, 01:19:55 PM »
Conklin Conklin where have I heard that name????????
In memory of
  Marie B.
1926-2010

Offline poplar1

  • Hero Member
  • *****
  • Posts: 5876
  • 102C-6 = "Old Brass" Hand Telephone Set
Re: I Need a Leich 601L Diagram
« Reply #6 on: March 21, 2013, 09:51:50 PM »
My Leich 601L arrived today, this time without any damage, but it does not work.  There is no line cord, and the wiring to the dial is obviously not original.  I tried connecting a line cord to the most obvious terminals, but without success.  I suspect that other wires are going to the wrong places, but I cannot find a wiring diagram.  The telephonecollectors.info website does not have a drawing for this model.  Can anyone provide a drawing?  

Thank You


Larry





I don't have a diagram, but I do have an original dial harness if you want it.
« Last Edit: March 22, 2013, 07:22:51 PM by poplar1 »
"C'est pas une restauration, c'est une rénovation."--François Martin.

Offline LarryInMichigan

  • Hero Member
  • *****
  • Posts: 4824
Re: I Need a Leich 601L Diagram
« Reply #7 on: March 21, 2013, 09:59:23 PM »
I haven't done much with this phone in the past two years, but I do occasionally use it.  An original wiring harness would be nice.  I am going to be awfully busy for the next several weeks though, so if it is alright, let me get back to you at a later date.

Thank You

Larry