Author Topic: Australian 802  (Read 1134 times)

Offline GTElover

  • *
  • Posts: 24
Australian 802
« on: April 16, 2011, 03:50:03 AM »
[img]It's a long shot but me and my better half purchased an Australian 802, it was released in 1979 and is very similar to the British 746.  Really need help in converting it to work in the UK. 

Any help would be great, below is an image of the phone in question.

Regards
Matt

Offline Owain

  • **
  • Posts: 824
  • Consider Your Colour Scheme (M C James for GPO)
Re: Australian 802
« Reply #1 on: April 16, 2011, 07:49:10 AM »
If your phone has an Aus 6 pin plug and 6 way cord:

Conductor ColourAus Plug Pin NoNormal FunctionUK Equiv
White
2
A or + LineLine jack plug 2 or Red
Red
3
Bell InLine jack plug 3 or Blue
Orange
4
Bell OutLine jack plug 5 or white
Blue
6
B or - LineLine Jack 5 or white

You will need to open the phone, look at the resistance of the bell coils, and whatever the difference is between the bell coils and 4,000 ohms, insert a resistor of the next higher value in series with the bell coils.

See also
http://www.retro-rotary-phones.com/ccp0-display/800-series-telephone-pmg-telecom.html
« Last Edit: April 16, 2011, 07:50:46 AM by Owain »