Author Topic: screw/bolt specifications for WE 302 phones  (Read 5880 times)

Offline RotoTech99

  • ****
  • Posts: 484
Re: screw/bolt specifications for WE 302 phones
« Reply #15 on: June 09, 2014, 05:16:43 PM »
I have found that the screws used to mount the 500 and 2500 housings of WE sets that go into a threaded insert in the housing of these sets works good for 302 and 5302 sets.

Offline Babybearjs

  • Hero Member
  • *****
  • Posts: 2058
Re: screw/bolt specifications for WE 302 phones
« Reply #16 on: July 24, 2014, 02:31:57 PM »
everyone on this site that restores old phones is suppose to have a whole box of different screws... everytime I have to scrap a phone or piece of equipment I always take all the screws out of the unit prior to disposing of it. especially with computers! screws always get reused and for these old phones, it always comes in handy have the hardware around. for those odd sizes, 6-40, 6-36, and 2-56... the hobby stores seem to be the only place to find those... but, really if you've ever had to scrap a 302, always SAVE the Screws.... they will come in handy later on....
John

Offline Doug Rose

  • Hero Member
  • *****
  • Posts: 6608
  • Blondie & the Kid of Phone
Re: screw/bolt specifications for WE 302 phones
« Reply #17 on: July 24, 2014, 07:30:31 PM »
word up!
Kidphone