Author Topic: 302 E/G ???  (Read 1118 times)

Offline HarrySmith

  • Hero Member
  • *****
  • Posts: 4940
  • 1937 302
302 E/G ???
« on: January 11, 2012, 06:31:46 PM »
What is a 302 E/G ???
Could not find any reference to it on Paul's site. Since it is in orange ink I am thinking it was a refurbishers mark but I have seen 302 shells marked with orange ink inside with AA1 or H1 stamps.
http://www.ebay.com/itm/250971302781

Correction: Now that I think about it I think the marks were H7 not 1.
« Last Edit: January 11, 2012, 07:09:57 PM by HarrySmith »
Harry Smith
ATCA 4434
TCI

"There is no try,
there is only
do or do not"

Offline Phonesrfun

  • Hero Member
  • *****
  • Posts: 4867
  • "Number Please"
Re: 302 E/G ???
« Reply #1 on: January 11, 2012, 10:43:08 PM »
What's inside?
-Bill G

Offline Phonesrfun

  • Hero Member
  • *****
  • Posts: 4867
  • "Number Please"
Re: 302 E/G ???
« Reply #2 on: January 11, 2012, 10:55:33 PM »
It appears to be a standard 302 with a ringer cut-out switch.

It is listed in the TCI document library.

See:

http://telephonecollectors.info/index.php?option=com_docman&task=doc_download&gid=2156&Itemid=27

See the 4th item on the list.

« Last Edit: January 11, 2012, 10:57:19 PM by Phonesrfun »
-Bill G

Offline paul-f

  • Hero Member
  • *****
  • Posts: 2958
    • Old Telephones as Entertainment!
Re: 302 E/G ???
« Reply #3 on: January 11, 2012, 11:25:10 PM »
What is a 302 E/G ???
Could not find any reference to it on Paul's site.

Harry,  There's too much info on all the variations to post reasonably on the site.  That's why there are references to the BSPs.

Look in the table on the 300-series page for the 302, then look to the right to find some reference BSP numbers, then look them up in the TCI Library.  You'll find info on the variations.

Hint: start with the first one, C32.502
Visit: paul-f.com         WE 500  Design_Line

.

Offline Babybearjs

  • Hero Member
  • *****
  • Posts: 2057
Re: 302 E/G ???
« Reply #4 on: January 12, 2012, 01:41:05 AM »
how strange? I thought the 302 with the cutout switch was the 305?
John

Offline Phonesrfun

  • Hero Member
  • *****
  • Posts: 4867
  • "Number Please"
Re: 302 E/G ???
« Reply #5 on: January 12, 2012, 02:28:42 AM »
I stand corrected.  It is the 305 that has the cutout.  Apparently the only difference between a regular 302 and a 302 e,f,g,h is the 3- conductor cord which allows for divided ringing.  I mis- read the entry in the library.

-Bill G

Offline Doug Rose

  • Hero Member
  • *****
  • Posts: 6589
  • Blondie & the Kid of Phone
Re: 302 E/G ???
« Reply #6 on: January 12, 2012, 10:14:18 AM »
Harry....can you post a picture of the insdie....thanks....Doug
Kidphone

Offline HarrySmith

  • Hero Member
  • *****
  • Posts: 4940
  • 1937 302
Re: 302 E/G ???
« Reply #7 on: January 12, 2012, 10:42:18 AM »
Here it is. Looks normal to me.
Harry Smith
ATCA 4434
TCI

"There is no try,
there is only
do or do not"

Offline Doug Rose

  • Hero Member
  • *****
  • Posts: 6589
  • Blondie & the Kid of Phone
Re: 302 E/G ???
« Reply #8 on: January 12, 2012, 10:47:33 AM »
Harry....Agreed....looks like a normal 302.

Bill....divided ringing? I was never good at math ;D

Doug
Kidphone

Offline Phonesrfun

  • Hero Member
  • *****
  • Posts: 4867
  • "Number Please"
Re: 302 E/G ???
« Reply #9 on: January 12, 2012, 12:38:05 PM »
Bill....divided ringing? I was never good at math ;D

Doug

As in providing the third wire (yellow) which became standard on 500's.  This allowed for divided party-line ringing between ground and either L1 or L2.  That about summs it up  :)

-Bill G