Author Topic: Dial screws sizes (Plus other telephone screw sizes!)  (Read 6364 times)

Offline poplar1

  • Hero Member
  • *****
  • Posts: 5553
  • 102C-6 = "Old Brass" Hand Telephone Set
Re: Dial screws sizes (Plus other telephone screw sizes!)
« Reply #30 on: September 26, 2015, 07:00:25 PM »
Does anyone know any of the following values?

Need info on screw sizes for multi-slot pay phones:

                        Western Electric/Northern Electric:

                                Coin Vault Door (14- or 30-type lock)

                                Large screw for coin chute

                                Upper Housing Lock (10-G, 10-H or 21-B)

                         Automatic Electric:

                                 Vault door (10-L type lock)

                                 Coin chute

                                 Upper Housing Lock (29-S)

Thanks

"C'est pas une restauration, c'est une rénovation."--François Martin.

Online TelePlay

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6504
  • A Ringy-Dingy Thingy
    • . . . been good so far
Re: Dial screws sizes (Plus other telephone screw sizes!)
« Reply #31 on: September 26, 2015, 08:55:00 PM »
My NE233 has a 21B upper lock fitted with four 6-40 NC pan headed, slotted machine screws.
            John . . .

              

Offline Pourme

  • Hero Member
  • *****
  • Posts: 1338
  • Benny
Re: Dial screws sizes (Plus other telephone screw sizes!)
« Reply #32 on: May 11, 2016, 09:34:05 PM »
Does anyone know the proper screw size used to attach the base to a SC oil can stick? I need 3 of them..
The Internet is a telephone system that's gotten uppity

Offline intagas

  • *
  • Posts: 20
Re: Dial screws sizes (Plus other telephone screw sizes!)
« Reply #33 on: August 22, 2016, 11:33:12 AM »
I'm not coming up with 4-36 screws for dials but 1/4 x3/48 like the finger stops.