Author Topic: Align fingerwheel on AE dial  (Read 650 times)

Offline dket5

  • *
  • Posts: 1
Align fingerwheel on AE dial
« on: April 07, 2013, 01:24:34 PM »
I have an AE dial on a Kellogg Redbar, but the fingerwheel doesn't line up with the numbers. Needs to be about 1/4 inch clockwise to line up correctly. I haven't been able to solve this. A little help please?


Offline HarrySmith

  • ***
  • Posts: 6564
  • 1937 302
Re: Align fingerwheel on AE dial
« Reply #1 on: April 08, 2013, 12:50:59 PM »
It appears the goverenor may be out of adjustment. See the upper circled area, the counterweights are sticking out. In lower circle loosen the nut and run the screw down until the weights are inside. That may not fix the alignment issue but I think it will help.
Harry Smith
ATCA 4434
TCI

"There is no try,
there is only
do or do not"