Telephone Switching > Key Systems (Electronic, 1A2 etc)

WE ICM on a 464/564 series phone

(1/1)

Babybearjs:
Hi all.... here is my question.... I have a 464 and a 564 desk phones and my intercom line is on the 5th line.... without having to change a bunch of wiring, how can I get it moved to the third line.... I have a 1A1 system and the first 3 lines are connected through a WE 212 KTU. the fourth line is on a 202 and the 5th line is connected to the 207C ICM Module. How did Ma Bells Boys make this type of change back in the day??  John

WesternElectricBen:
I've wondered the same thing, with my KSU, though I have a 500 style, with less keys, than the usual 6.

Ben 

AE_Collector:
The output from KSU's as well as each cable running to all of the phones were all terminated on quick connect blocks and " jumpered". That is how rearrangements were easily done over the years at an installation.

Post some pictures of how your systems are wired John & Ben.

Terry

Babybearjs:
So I can just "jump" the line from my 207 to 212? it won't bother anything will it? I'll try it....  Enclosed are pics of my setup... Sorry, I still haven't taken pictures of the backside of the KTU since I finished wiring it...

Navigation

[0] Message Index

Go to full version