Author Topic: Oldest 400-type 1A2 linecard?  (Read 610 times)

Offline Otto Vaughan

  • *
  • Posts: 4
Oldest 400-type 1A2 linecard?
« on: September 08, 2021, 02:45:00 PM »
I recently came across a Western Electric 1A2 line card with component dates of  IV-63.  1963 is very early for 1A2 equipment.
It has a sticker on top of a sticker  that IDs it as a 400B line card but I suspect under the top sticker the original sticker says  400A.

I know the difference between the 400A and 400B is the addition of a diode.  I will investigate to see if that diode was added.

Does anyone have a 400A card?  Or something earlier than "IV-63"?

Any interest in a photograph?  The option block appears unique too.

Rick Walsh



Offline Key2871

  • **
  • Posts: 3019
Re: Oldest 400-type 1A2 linecard?
« Reply #1 on: September 08, 2021, 06:15:36 PM »
I've never seen a 400A or B. That's definitely old.
Does it work?
KEN

Offline poplar1

  • ***
  • Posts: 6654
  • 1051-AL
Re: Oldest 400-type 1A2 linecard?
« Reply #2 on: September 08, 2021, 10:19:08 PM »
Rick, we like pictures!
"C'est pas une restauration, c'est une rénovation."--François Martin.

Offline Otto Vaughan

  • *
  • Posts: 4
Re: Oldest 400-type 1A2 linecard?
« Reply #3 on: September 09, 2021, 04:25:40 PM »
Yes the card works

Believe it started life as a 400A and was upgraded to 400B (diode added).  I have a 1965 400B that has "400B" in the traces on the underside; the 1963 card does not.
Here are pics

Offline Otto Vaughan

  • *
  • Posts: 4
Re: Oldest 400-type 1A2 linecard?
« Reply #4 on: September 09, 2021, 04:27:58 PM »
more pics

Note early option block with wire wickets (and copper sleeves)

Rick

Offline Otto Vaughan

  • *
  • Posts: 4
Re: Oldest 400-type 1A2 linecard?
« Reply #5 on: September 09, 2021, 04:53:16 PM »
So I now realize this one actually does say "400B" in solder on the underside  Right above "R 7/76" (refurbished) in the last photo.  It was so over soldered it didn't loo like lettering initially.   So I am still wondering what is underneath the 400B sticker.  Seems odd they would but "400B" on top of "400B"!

Rick

Offline Key2871

  • **
  • Posts: 3019
Re: Oldest 400-type 1A2 linecard?
« Reply #6 on: September 09, 2021, 08:00:21 PM »
Perhaps a different version? Or the addition of the diode changed it to a B.

I've seen metal frame cards before but it's been a very long time.

Does it need a system ground to Ring up during an incoming cycle, or will it ring up in either case.

I remember the D cards prior to version 15 required a system ground to Ring up.

And the option block is on the card end, not the head as they were later.
Did they have a C card as well, and E.
I can't find anything on this old of a card, in my BSPs.

I've heard of E cards but I guess they are very rare to find. But I've not heard of C s so I don't know if there was such.
But that's a very cool piece of key system history you have.
« Last Edit: September 09, 2021, 08:10:43 PM by Key2871 »
KEN