News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

Power supply questions - 101G

Started by martyspaulding, March 22, 2017, 12:12:40 AM

Previous topic - Next topic

martyspaulding

Greetings all.

I recently acquired a nice 555 cordboard.

I saw somewhere that the 101G power supply would be a suitable power supply for it, but I'm not finding the proper 90v 20/30 Hz power tap in that unit to supply ringer voltage to the phones (about 12) that I will be using in my set up.

Am I missing something ? Or do I have the wrong supply to power both the cordboard *and* the phone ringers ?

Marty Spaulding
Kalamazoo MI
Marty Spaulding
Kalamazoo MI

Ktownphoneco

Marty   ...    You can find a lot of information on the 101G power supply here, at the TCI Library.    Link :  http://www.telephonecollectors.info/index.php/search-1/google-search    Just type in "101G" in the search box, and you'll get quite a few search results.

Jeff Lamb

poplar1

The 101G with 20~ ringing generator (J86731A-2 List 4) is twice as large as the 101G without ringing (J86731A-2 List 2):

"C'est pas une restauration, c'est une rénovation."--François Martin.

trainman

An Elgin Electronics EAK 4 power supply will also work. These were used by Stromberg Carlson in their key systems. And i think these are more plentiful. I bought two off ebay last winter.

martyspaulding

THANKS GUYS.

I got the answer I was looking for, and have found a suitable replacement.

Anyone have a use for my 101G ?

$50 and I'll pay the shipping.

Marty Spaulding
Kalamazoo MI