Using a 425E network on 151al candlestick

[Fordman 1966]

Hello all I have my 151 candlestick working on a 295 subset. I picked up a W.E. metal box subset has original ringer but a 425E network has been installed.the stick has a 4 conductor cord r,g,y&b conductors.How would you wire it to a 425 network I could not find any info on contacts on network to make it work.The 151 works great on 295 subset.Any and all help will be appreciated thanks Scott

[poplar1]

This diagram by  Bingster is in the wiring diagrams category. It is actually for a 202, but the connections would be the same.

https://www.classicrotaryphones.com/forum/index.php?topic=784.0

It's in the first post in the topic. I haven't tried this at home.

This is for a 4-wire C4A ringer. If you are using a 2-wire ringer, then connect one ringer wire to L1, other ringer wire to K and run a jumper wire from L2 to A.