News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

Touch a Matic 32 Adjunct Dialer Wiring to 10 btn Set

Started by JB-Alert, December 14, 2024, 05:09:52 PM

Previous topic - Next topic

JB-Alert

Hello,

One of my projects that I'm getting to is adding the Touch a Matic 32 Adjunct Dialer to a 10-button TT keyset. Unfortunately I haven't had much success and I'm hoping someone on this board may have some expertise on this. I tried following the BSP (501-164-201) but I must be missing something.

The Touch Tone dialer is model 2870A1, and the 10-button set is model 2830CM. The dialer is connected to the 95B1 transfer, and works as expected, and the 10-button set is connected to my 1A2 system. The 10-button set is connected to a working 4A speakerphone.

I'm looking for help on where to connect the dialer wires to the terminal numbers under the 10-button set dial pad or network. I don't believe all the wires are needed for this set; just to dial and mute when using the 4A. Here are the colors coming out of the adjunct dialer:

Blue/White
White/Blue

Orange/White
White/Orange

Green/White
White Green

Brown/White
White/Brown

Slate/White
White/Slate

Thanks in advance for any help!!